Categories

PlayStation 2 controller connected over a RFM12 wireless module

Posted on Thursday, March 8th, 2012 in Arduino, AVR by DP

Dustin connected his PlayStation 2 to a PC wirelessly using two RFM12 modules to make the link. On both sides AVRs with Arduino bootloaders drive the wireless modules. All the source code for this project is available.

This entry was posted on Thursday, March 8th, 2012 at 9:00 pm and is filed under Arduino, AVR. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “PlayStation 2 controller connected over a RFM12 wireless module”

  1. sajad says:

    send me your cod

Leave a Reply to sajad

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please