Categories

High-voltage arcs using a flyback transformer from a monitor

Posted on Friday, January 20th, 2012 in DIY by DP

Hak8or uploaded a gallery of high voltage arc pictures. The setup was salvaged from an old CRT monitor. He suspects the flyback transformer produces around 30 kV.

I found some old pictures of me playing around with a flyback, and I wanted to test out this awesome gallery thing I found, so I mushed them together, and well, here they are!

The full size pictures are around 2MB each, so users with slow internet connection be advised.

Via the forum.

This entry was posted on Friday, January 20th, 2012 at 1:00 pm and is filed under DIY. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “High-voltage arcs using a flyback transformer from a monitor”

  1. kdw says:

    Nice photos. After all these years, high voltage arc projects remain one of my favorites.

    • hak8or says:

      Thanks! :)

      I personally regard high voltage as one of the most amazing things in electronics, it is what originally got me interested in electronics even!

      Also, nice write ups on your blog, I never saw such packaging for QFN ic’s, especially when you only ordered two of them. :P

Leave a Reply to hak8or

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!