Web platform back in stock

Posted on Monday, January 16th, 2012 in web platforms by DP

Web platform v1.1 is back in stock at Seeed Studio.

The Dangerous Prototypes web platform is a tiny server designed for networked hacks where a full PC is inconvenient. There’s lots of interesting projects that bridge the internet to microcontrollers, but most of them have a PC in the middle to handle network stuff. This business card-sized internet appliance can connect to web services, control physical objects from a browser interface, or email sensor status reports; no PC intermediary required!

Get an assembled web platform for $40, including worldwide shipping.

This entry was posted on Monday, January 16th, 2012 at 11:00 am and is filed under web platforms. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

10 Responses to “Web platform back in stock”

  1. Chris says:

    A quick teaser – I have some new rock-solid firmware for Web Platform running Contiki 2.5, I will post it up over the next few weeks.

  2. Charudatt says:

    Raspberry Pi is looking to be more promising and a good value for money.

  3. Ian says:

    Raspberry Pi is very exciting, and we are all looking forward to it. It’s a completely different beast though, more like a full computer. The web platform is something a hobbyist could use as a basis for their own custom hardware. Few will be able to hand-solder the Broadcom processor or RAM used on the Pi, and making multi-layer PCBs is very expensive.

  4. Roy says:

    I would like this board if it used the PIC32MX795F512 instead of a 16bit controller, but it is still a great board.

  5. PK says:

    When will seedstudio have it back in stock? It still seems to be out of stock?

  6. Ian says:

    The raspberry pi pretty much pawned this market so I don’t plan to order any more, thanks for your interest though!

Leave a Reply to PK

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please