WiFi-Jacket: Atmel-based MRF24 WiFi development board

Posted on Thursday, January 5th, 2012 in dev boards by DP

Léon and a couple of his mates made a development board for the Microchip MRF24WB0MB/RM WiFi module. It’s based on the Atmel ATmega328 microcontroller and features lots of breakout pins, as well as some LEDs and buttons.

Via the contact form.

This entry was posted on Thursday, January 5th, 2012 at 1:00 pm and is filed under dev boards. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

6 Responses to “WiFi-Jacket: Atmel-based MRF24 WiFi development board”

  1. Sjaak says:

    Are there non-microchip stack IP implementations for this WiFi board? or are the registers public?

    Last time I looked the only way to use this board is by the microchip stack and thus pics as microcontroller.

  2. Tom says:

    Looks interesting but can’t connect to the website… Wonder if you can buy it? BTW Asynclabs had Arduino shield with MRF24WB0MB but they discountinued over a year ago, good they kept the library.

  3. Shadyman says:

    Seeed also sells an MRF24 on a Bee-footprint carrier board (Using the WiShield library):

  4. The driver says:

    I have seen it I have smelt. ;-) It looks good and its possible to load a bootloader á la Arduino with all his libraries all things ar posible where you dream off.
    A nice great development board.

Leave a Reply to Sjaak

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: So these go for around $330 USD and NO published calibration procedure online or otherwise? Given what's inside - I don't think I'll be considering...
  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...