It features a single row of 39 pins that can be interfaced with a standard bread board. All the remaining pins are broken-out to dual-row headers on top of the board.
A 800mA 3.3V voltage regulator provides adequate power for any CPLD configuration. The IO pin power supply can be connected to the on-board 3.3volt supply, or you can use an external voltage (1.5-3.3volts) from the VIN header.
As with our smaller CPLD boards, we connected an oscillator to one global clock pin. One user LED is available as well.
Free PCBs for this project should become available in a month or so.
We will be posting new project previews or prototypes every Thursday, so be sure to check in.