Categories

Glass Block LED Matrix, controlled outdoors via tablet

Posted on Wednesday, October 19th, 2011 in Android, Arduino by DP

Here is a video from Hive 13 that shows how an Android tablet is used to control a glass block LED matrix via a wireless connection. After installing a LED matrix behind a glass block wall in their bathroom, hackers at Hive 13 are figuring out a way to control them. After some initial struggles they came up with Wireless control of the matrix with a Android or IOS enabled device.

This entry was posted on Wednesday, October 19th, 2011 at 8:00 pm and is filed under Android, Arduino. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Glass Block LED Matrix, controlled outdoors via tablet”

  1. michael says:

    get tetris happening on that :)

Leave a Reply to michael

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: After reading all the comments, I have questions: Does this mean STM32 and AVR boards/parts from dodgy online sellers are suspect? What are your opinions?...
  • Sjaak: They are available with more flash then their ST counterparts which makes them more interesting. You don't have to port the code, but use another...
  • Sjaak: I dunno if you can 'license' register definitions, but I'm not a lawyer. Since the chip is available since 2015 and I haven't heard of...
  • Sjaak: They can be found on taobao or the Chinese markets in Shenzhen.
  • KH: I've been a really good boy, I only buy MCU parts from RS and Farnell. :-)