Categories

xQFP breakout board back in stock

Posted on Thursday, June 30th, 2011 in News by Ian

xQFP breakout boards are back in stock at Seeed Studio. These popular boards let you solder a surface mount chip and then use it with wires or breakout pins. 0.50mm is by far the most popular size.

Available in 0.50mm, 0.65mm, and 0.80mm for $3.

This entry was posted on Thursday, June 30th, 2011 at 6:06 am and is filed under News. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “xQFP breakout board back in stock”

  1. Very cool stuff! I’d also like to have breakout boards for SOIC packages of various pitches.

Leave a Reply to László Monda

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...