Categories

Week in (p)review: April 01, 2011

Posted on Friday, April 1st, 2011 in week in review by Ian

Don’t forget to share your current project in the comments or the forum. This week our favorite project gets a free QFP protoboard.

Here’s a summary of major developments over the last week:

April already?

  • We’ve got our fingers crossed for Bus Blaster v2
  • It’s time for a part order, PCBs will go out too
  • Is there any interest a small open source web server module with TCPIP to serial, etc?
  • App notes and datasheets all weekend
  • Free PCB Sunday
  • Status update on Monday
  • New tool post on Thursday

What are you hacking this week?

This entry was posted on Friday, April 1st, 2011 at 12:46 pm and is filed under week in review. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

5 Responses to “Week in (p)review: April 01, 2011”

  1. Brian says:

    What is needed is a open source device that can do SSL like things without an OS or a ton of memory. TCP/IP to serial is already on the market in a variety of flavors.

  2. Fux says:

    Quote: “Is there any interest a small open source web server module with TCPIP to serial, etc?” Sounds interesting – working on Linux and Windows Clients?

  3. Ian says:

    I was thinking something like an open source XPORT:
    http://www.lantronix.com/device-networking/embedded-device-servers/xport.html

    obviously bigger and not integrated, but same basic TCPIP to serial functionality.

  4. Drone says:

    Here’s what we really need, an embedded Web Server with SSL/TLS support and SSH/SCP login; and no I don’t mean a small Linux/xBSD box. Good luck with that one…

    I Ordered one-each of the CPLD boards, they should arrive in the next day or two. Sheesh, it is takes just as long to download the boated Xilinx development software as it does to ship the CPLD boards from Hong Kong! Anyway, that’s what I’m hacking this week.

Leave a Reply to Brian

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please