Categories

Arduino and GSM cellular tutorial

Posted on Thursday, January 20th, 2011 in Arduino, how-to by the machinegeek

Tronixstuff has produced the first part of their tutorial series on using a GSM cellular modem with the Arduino. In this part they cover hardware interfacing and testing, sending a text message, and embedding data within a message.

This segment is the latest is a series of Arduino tutorials posted by Tronixstuff.

This entry was posted on Thursday, January 20th, 2011 at 5:54 pm and is filed under Arduino, how-to. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “Arduino and GSM cellular tutorial”

  1. John Boxall says:

    Thank you for listing my tutorials. I hope people find the interesting and useful. Cheers, John

  2. M says:

    Gotta agree with John,
    Thanx for linking to these.
    -M

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: Gee, just the sight of one of these HP493A TWT laboratory amps brings back decades-old memories. There are four models covering 1-12.4 GHz in steps...
  • KH: After reading all the comments, I have questions: Does this mean STM32 and AVR boards/parts from dodgy online sellers are suspect? What are your opinions?...
  • Sjaak: They are available with more flash then their ST counterparts which makes them more interesting. You don't have to port the code, but use another...
  • Sjaak: I dunno if you can 'license' register definitions, but I'm not a lawyer. Since the chip is available since 2015 and I haven't heard of...
  • Sjaak: They can be found on taobao or the Chinese markets in Shenzhen.