Mikael Gustafsson, developer of the ds30 Loader we depend on for lots of projects, spent some time hacking the web platform bootloader. His insights are posted below, you can download his bootloader tests in an archive or from the project SVN.
Because of the “long” download times I tweaked the bootloader firmware a little. Changed operation to 40MIPS. Added auto baudrate detection which allows for mega baud rates+. The limit of the ftdi chip is 3 Mbps. I’ve successfully downloaded at 2Mbps. But it seems using baud rates above 256k doesn’t do much difference.
You can buy an assembled web platform for $40, including worldwide shipping. Seeed isn’t currently shipping due to the Chinese spring holiday, but your order will ship ASAP after they return on February 22.
Bootloader hacking continues below.
Changed frc to operate at maximum frequency to minimize write times. Added clock switching because I don’t think pll settings should be change “online”. frc is used at startup then I switched to frc+pll after the pll settings are applied.
Because the frc is tuned in my modified firmware. Your main application is probably not compatible because it contains pll config. As mentioned in the manual it recommended to use the same configuration for the firmware and main application.
There’s an easy way of upgrading the bootloader without a programmer. But it may be risky for the average user:
- Reboot device, led 1 is lit when bootloader is started
- Download temporary bootloader: “bootloader max frc 40MIPS abaud 3rd page.hex”
- Led 1 is unlit when receive timeout occurs.
- Led 2 is lit when the new bootloader in 3rd last page is started.
- Apply the following settings: don’t write goto at 0x00, auto baud rate, custom bootloader 3, 1.
- Download new bootloader: “bootloader max frc 40MIPS abaud.hex”
- Reboot device
Here are the sources and latest beta binaries.