will_j posted a Bus Pirate script that controls a Sure Electronics 8×32 LED marquee:
Here’s a quick and dirty perl script to display ‘BPv3’ on a Sure Electronics 8×32 LEd Matrix display.
You can also use a 16×24 display if you change the second command code to 44 from 40.
Any improvements gratefully received – i.e. a nice character lookup table process would be good!
View a copy in the Bus Pirate scripts folder. We demonstrated a slightly different Sure LED matrix a in a demo: post a few weeks ago.
Thanks for the tip!
i want made this project please send to me this complete project thanks
Hi rey, what part of the project do you need?
HI want too. all parts coz i am beginer kk
Hello, I would like to know how you connect the LED matrix to the bus pirate. thx.
Hi I would like to make this project can u kindly send me the code and the schematic diagram together with the component lists, thank you.
U need 2 buy a Bus Pirate, assuming U can still find de LED matrix display.
Good morning. I’m having some difficuly understanding how the display ” SURE ELECTRONICS P4 32X8 3208 RED LED DOT MATRIX UNIT BOARD SPI LIKE” Arduino UNO works. – I would like to add some buttons and potentiometers to the system. For exampe: by pressing the 1 st button the name display with the memorised name could light up per minimum 30 seconds and so on for the entries on the other buttons. – I would like to know how to add two potentiometers: one to adjust the speed of sliding and one to adjust the time. Thank you in advance. Looking forward to your kind reply. Best regards