Categories

Free PCB Sunday: Hackable Christmas ornament

Posted on Sunday, November 29th, 2009 in Free PCBs by Ian

card-angle.450

We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few professionally-made PCBs from one of our past or future projects, or a related prototype.

This week we’re giving away free PCBs for the Hackable Christmas ornament. We made these for family and friends this holiday, but due to minimum order sizes we got twice what we needed. The extra ornaments are available at Seeed Studio as a $12 surface mount kit, and Seeed will assemble yours for $3 more ($15 assembled).

Some stuff:

  • Yes, we’ll mail it anywhere in the world!
  • Be sure to use a real e-mail in the address field so we can contact you for shipping info.
  • First come, first serve. Sometimes we have extra PCBs or we can’t contact a commenter. When this happens, we move to the next person on the list.
  • Limit one PCB per address per month.
  • Like everything else on this site, PCBs are offered without warranty.

We try to stagger the free PCB Sunday posts so every time zone has a chance to participate, but the best way to see the post first is to use the RSS feed.

This entry was posted on Sunday, November 29th, 2009 at 3:30 pm and is filed under Free PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

9 Responses to “Free PCB Sunday: Hackable Christmas ornament”

  1. James says:

    Send one my way if you please?

  2. Tom says:

    I’d like one also — thanks!

  3. John says:

    Please I would like one. Many thanks.

    John, CET

  4. bikin' eddie says:

    ditto, with low expectations ;-)

  5. Tiago Henriques says:

    please…. :P

  6. Brett says:

    me too please ! No expectation at all :)

  7. pppd says:

    If the PCBs are still available I’d like to get one too. Once assembled I’ll give it to my friend:)

  8. Francis says:

    Thank you.

  9. Judy says:

    This looks awesome! I’d like one, too.

Leave a Reply to Tiago Henriques

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please