Categories

Bus Pirate probe cable, $7.75

Posted on Tuesday, October 13th, 2009 in Bus Pirate, Bus Pirate accessories by Ian

iancable1

Seeed Studio is now listing a Bus Pirate compatible probe cable kit for $4.90. That’s about $7.75 including worldwide shipping. This cable has been a pretty popular item, we’re really glad Seeed is making them available for everyone.

iancable3

The cable is a kit that you solder yourself. It includes a 2×5 connector that mates with the Bus Pirate, rainbow ribbon cable, and 10 hook type probes.

You can still preorder an assembled Bus Pirate v3 with a red PCB for $30 at Seeed Studio, including worldwide shipping.

iancable2

This entry was posted on Tuesday, October 13th, 2009 at 6:28 am and is filed under Bus Pirate, Bus Pirate accessories. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Bus Pirate probe cable, $7.75”

  1. Merve says:

    Woooow, that’s really awesome and pretty cheap. I’ll have to get a couple

Leave a Reply to Merve

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...