Categories

App note: Regulator topologies for battery-powered systems

Posted on Saturday, September 7th, 2013 in app notes by DP

appnote

Here is an app note from Maxim describing the various SMPS regulator topologies for battery powered systems:

This tutorial presents an overview of regulator topologies for battery-powered equipment. The discussion covers linear regulators, charge pumps, buck and boost regulators, inverters, and flyback designs. The importance of peak current is explained, and schematics of each topology are shown.

This entry was posted on Saturday, September 7th, 2013 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “App note: Regulator topologies for battery-powered systems”

  1. MJ says:

    The output polarity for the inverter should be the other way ?

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: I would add some more protection in the used trigger file (on the serverpilot site) then not using a standard name :) hopefully they use...
  • Pete Castagna: My friend Charlie who worked in synthesizers at a DOD type of place made a modification to this avalanche pulse generator that allowed him to...
  • Sam Catchpole: Yes please :D
  • Giovambattista Matera: another try
  • rumburack: jes