Categories

Avalanche pulse generator build using 2N3904

Posted on Wednesday, June 26th, 2013 in DIY, measurement by DP

Pulse_Generator_Board

Kerry Wong documented his avalanche pulse generator build using 2N3904:

The majority of avalanche pulse generators hobbyists built used 2N2369, the same transistor used in Jim Williams’ original experiment. One of the main benefits of using 2N2369 is that it can avalanche at a relatively low voltage (under 90V). But most general purpose NPN transistors such as 2N3904, 2N2222, SS9013, etc. can be used in avalanche mode as well. Andrew Holme for example, had built such a pulser using the popular 2N3904. I have also found 2N3904 to be a great alternative to the hard-to-find 2N2369, despite having a slightly higher avalanche voltage threshold. During my build process, I sampled a large batch of 2N3904′s, and found that most can avalanche pretty consistently at around 100V.

This entry was posted on Wednesday, June 26th, 2013 at 1:00 pm and is filed under DIY, measurement. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Paul Campbell: I'm old enough that I started programming with punched cards .... each card had a sequence number in the last few characters. A friend once...
  • Ian: test comment on /blog/ page
  • ian: No, that's exactly how it should be :) Sorry about missing names on comments, the theme is being reworked as we speak.
  • J. Peterson: Nice writeup. It looks like some of the formatting for your command examples needs some missing newlines?
  • Geert Jordaens: I'm not sure what kind of licensing I have to add since it is a fairly straight forward implementation of the adaptive Huffman Decoding. For...