Bus Pirate v3 case sticker

January 28, 2010 in Bus Pirate, pin reference | 5 comments

Keep your Bus Pirate pins straight with this case sticker[PDF!] designed by ecronin:

I made up a sticker for the combo of the seeed case and breakout harness, thought others might find it useful… Unlike in the above picture, I connect the cable with Black to GND, which puts the two EZHook-like hooks on MISO/MOSI. Thought others might find it handy. It also includes the LED names and a gratuitous barcode since the project lacks a real logo.

Thanks for the link!

Tags: , ,

  1. haley on January 28, 2010 at 1:15 pm

    I would prefer the color sequence be reversed.
    Cause the probe cable from Seeedstudio has special connector for GND and +5V

    Reply

  2. MetalMork on January 28, 2010 at 3:04 pm

    It’s the SeedStudio cable that’s reversed, IMO.
    The above colors are mapped right by ecronin. See http://wherelabs.files.wordpress.com/2009/10/bpv3cct.png for the PIN numbering sequence . MISO is 1, so brown, etc. etc.

    Reply

  3. ecronin on January 28, 2010 at 8:36 pm

    Easy enough to make both: http://www.gizmolabs.org/~ecronin/imgs/buspirate_seeed_case_sticker_b.pdf

    I found I’m using the IO lines on pins more than the voltage/ground, which I can pick up at vias with the larger clips if needed…

    Reply

    1. haley on January 29, 2010 at 3:55 am

      Thanks ecronin for the reversed color sequence!

      Reply

  4. Mike Szczys on January 29, 2010 at 7:36 pm

    Right on. I’m not putting on a case but I’m glad to have a color quick-reference. Thanks!

    Reply